Menu
close

What's included in the Laprise home kit

Gain in project' speed and efficiency. We manufacture and deliver on-site a complete home framework with a set of building materials and pre-engineered structural components. Laprise pre-engineered and pre-insulated wall panels are factory-assembled off-site. The exterior and interior finishing boxes (including hardware, nails, screws, glue, sealant, adhesive tape, etc.) are factory-prepared to avoid back-and-forth trips to stores during kit installation. The quantity of materials is guaranteed and the kit comes with a 10-year warranty.

Framework - Exterior Walls

1
Polyethylene sealed membrane used as vapor barrier and vapor barrier
2
Factory-assembled wood studs : 2’’ x 6’’ or option 2’’ x 8’’ with stud spacing 16’’ c-c according to plan
3
High-performance insulation (2'' x 6'' version) or very high-performance insulation (2'' x 8'' version) for advanced energy efficiency
4
Anti-torsion 1/2'' plywood on the entire surface of the walls (including sill plate, rim joist, and sill) ensuring structural stability, resistance, and optimal bracing
5
Continuous insulation of 1.5'' covering the entire surface of the walls (including sill plate, rim joist, and sill) to prevent thermal bridges of the structure
6
Weather shield to ensure water and air tightness.
7
Top plates: 2'' x 6'' or 2'' x 8'' depending on the version chosen
8
Lintels (wood or engineered wood)
9
Factory-installed double lathing/furring to prevent perforation of the vapor barrier
10
Acoustic sealant under the sill plate to optimize airtightness
11
Weather barrier adhesive tape to seal weather barrier for maximum water and air tightness and 1’’x 3’’exterior vertical lathing.

Framework - Interior Divisions

1
Pre-assembled non load-bearing divisions with anti-torsion system ready for drywalling
2
Pre-assembled load-bearing divisions with anti-torsion system ready for drywalling
3
Un-assembled basement load and non load-bearing divisions (according to plan)
4
2’’x 4’’ or 2’’x 8’’ wood studs (dry wood) according to plan
5
Double jambs

Framework - Floors

1
5/8’’ plywood, adhesive and screws
2
I-type floor joists
3
Stiffeners (if needed, according to plan)
4
Brackets for fasteners and nails
5
Load-bearing columns
6
Floor joist rim boards, engineered wood
7
Edge joists interior insulation (sprayed polyurethane foam) included with insulation installation works
8
Structural beams
9
Sill plates
10
Anchoring rails
11
Box for podium bath (according to plan)

Framework - Roof

1
Architectural asphalt shingles and accessories
2
Plastic cement (pitch)
3
Shingled starters
4
Eaves protection and self-adhesive membrane over the entire roof surface (applicable for asphalt shingles)
5
Galvanized steel valley flashings
6
Roof trusses and bracing
7
Attic fan
8
½" plywood (gables and roofs)
9
Drip edge flashings

Framework - Ceiling

1
Ventilation deflectors
2
Polyethylene sealed membrane used as vapor barrier
3
1"x3 " ceiling laths at 16 c/c
4
R-60 attic insulation
5
Insulated attic hatch

Framework - Doors and Windows

1
Lorendo high performance PVC windows with energy-efficient thermal glasses
2
Windows & doors head flashings
3
Window jamb extensions (PVC optional)
4
Insulated exterior steel doors
5
Exterior door handles
6
Insulated steel garage door (according to plan)
7
Factory-installed waterproofing membrane around openings
8
Insulating foam (urethane spray) around openings (doors and windows)
9
Window decorative tiles (according to plan)

Exterior Finishes

1
Under drip edge laths or 1"x3" exterior roof
2
Aluminum ventilated soffit
3
Fascia (according to plan)
4
Lightweight exterior siding (vinyl, wood fiber or wood) and finishing accessories (according to plan)
5
Masonry not included
6
Fireplace box (according to plan)
7
Sun guard beams (according to plan)
8
External load-bearing columns/posts (according to plan)
9
Balcony and/or patio and/or gallery (according to plan)
10
Decorative elements (according to plan)

Interior Finishes

1
Adjustable closet rail-based storage system with rods, poles and wire shelves
2
Baseboards and moldings
3
Drywall boards ½" and screws
4
Interior doors and hardware
5
Interior door handles
6
Staircase (according to plan)
7
Stair railings (according to plan)
8
Hand rails (according to plan)
9
Heat recovery ventilation device

Delivery

Kit transportation is included within 300 km from the city of Montmagny (Quebec) by municipal road network. Every additional km (exceeding 300 km) is calculated according to the kit delivery/construction address. Transport by sea not included.
*FOB price applies for delivery outside the province of Quebec.

Exclusions

  • Excavation
  • Foundation and foundation insulation
  • Kit installation and subcontracting works (plumbing, electricity, etc.)
  • Floor coverings
  • Plasterboard jointing and finishing
  • Painting
  • Wood fireplace and its prefabricated fireplace
  • Kitchen, bathroom cabinets and built-ins
  • Masonry stones
  • Gutters
  • Drywall corners
  • Land and services
  • Other possible exclusions
heartmap-markermagnifiercrossmenu